Many homeowners have experienced the frustration of hearing a toilet making noise after flushing. The noise can range from soft, too loud, and can occur several times per flush. Unfortunately, most of us do not know how to prevent this problem, and the only way to stop it is to find out the cause and fix it. Here are some common causes and some tips for dealing with the issue.
Plumbing in Tacoma plumber the culprit in many of the complaints about toilet noise after flushing is a clogged toilet drain trap. If this trap gets clogged with old food or debris, the trap will not drain the water supply to the bowl, resulting in an excess pressure. To solve this problem, first unclog the trap by using a plunger, and then replace it with a new one.
Bad Water Supply: Sometimes a low water supply line can also cause the water to sound like it’s backing up as you’re trying to flush. This can easily be fixed by a plumber by installing a new water supply valve. Most hardware stores carry water valve kits that you can install yourself.
Hissing Sound After Flushing: Another common toilet noise maker is the hissing or buzzing sound that’s created when you open the flapper after you flush. Sometimes this hissing sound comes from the seal between the flapper cup and the toilet tank. To fix this, simply remove the flapper and clean the area between it and the tank. This will make the hissing go away. You can use spray paint to make it go away if you don’t want to mess with the process.
DIY Project: A toilet hissing noise can usually be fixed without hiring a professional plumbing company. You can buy a new toilet that doesn’t make any noise and attach it to the flapper. Then attach the new toilet whistle to the flapper and you’ll instantly hear a hissing noise. If you don’t want to spend money on a professional, you can make one yourself. Many hardware stores carry everything you need to make a toilet whistle from items that you probably have at home. This is one DIY project that’s sure to be fun and entertaining.
Clogs Can Be Funny: Yes, clogs can be annoying. Clogs are a plumbing problem that happens when fecal matter, hair, food particles, etc. get caught in the toilet bowl, trap the water seal around the seal, and then slowly dissolve inside. When this happens, you’ll start to hear the annoying hissing sounds caused by the clogs.
Water Hammer: A toilet that uses water to flush has a small section of metal pipe near the top that connects to the water pump and the overflow pipe. The overflow pipe also has a large section of metal pipe that attaches to the floor drain. Over time, both of these pipes can become clogged with hair, food particles, and even urine. When this occurs, the water hammer starts to get loud and the flushing process becomes very slow.
To fix the noise, the pipe sections are cut and the parts are replaced. No matter what type of toilet it is, this fix will work. It’s probably more expensive than the others mentioned, but it’s worth fixing the problem if it happens because it could potentially damage the equipment. Don’t let loud vibrating noises stop you from having a good time. Just call a plumber to give your toilet a thorough clean and a visit won’t cost you much.
Water Hammer Absorber: The same reason applies to this one as the water hammer. When the water hammer starts to get loud, calling a plumber can help. When you take apart the plumbing system, you may find some damaged pipes. This can be repaired or replaced. However, it’s cheaper to replace it than to repair it because a plumber has to drill new holes into the walls.
Toilet Bladder Control: Another potential cause of toilet making noise is when the toilet gets full. When this happens, it can create pressure in the bowls causing it to vibrate. To solve this, simply open the valve and add water to the bowl until it balances again. Sometimes, you can turn the handle all the way down and let the water run freely until it gets back to normal. If none of these tricks work, the only other option is to shut the water supply and call a plumber. The noise is caused by the turning of the handle all the way counterclockwise.
When you have non-flushable items in your toilet, they will keep clogging up because of the constant moisture. They clog up with bacteria and other microorganisms. This also creates a foul odor. The best way to prevent clogging is to keep them away from areas where moisture accumulates such as near the toilet, in the bathtub or close to the plumbing pipes.
How do you fix a loud noise when you flush the toilet?
How do you fix a loud noise when you flush the toilet? What would cause this type of noise and how do you prevent it from happening in the future? I’m sure we all have experienced the “hum” and “whoosh” when using the toilet. There’s a reason why it is known as the clunk of the day.
The noise is caused by the water hitting the rough side of the bowl vibrating against the sides of the bowl. When you come to a stop, the liquid goes down the flange and exits through the sprayer. The noise is most often described as a “hum”. There are other sounds including the sound of running water and a clicking sound.
What causes this type of noise? Water pressure can be one possible cause. Sometimes as we use the toilet, we don’t fully close the lid properly causing the pressure to build up and create the noise. This can also be caused by flushing hard and long.
Another cause of this type of noise is when you add a very thick solution to the toilet. Often a thick solution will clog the strainer, making it clunk and make the noise. Adding too much liquid or grease can also clog the drain trap which causes the noise to occur. Sometimes this is just the buildup of deposits in the trap over time.
There are many solutions to fix a loud noise when you flush the toilet. One option is to unplug the commode to allow better flow of air. If you are doing this, be sure that there is no hair or a soft cloth hanging down near where you are going to plug the commode. Also if your toilet is over 20 years old, you may want to replace the air tank to avoid the loud noise. If you don’t know how to do this look for a local plumber. There are many contractors in the yellow pages that will come to your house and perform the job.
Another solution to eliminate some of this noise is to upgrade the toilet tank seal. Old tanks often wear out with age and allow air to mix with the water causing the noise. Also the rubber sealing on the tank often wears down and allows some of this air to mix with the water and cause the noise. If you don’t feel comfortable doing this on your own or you don’t have the proper tools you may want to call in a professional to do this job.
If these solutions aren’t the cause of the noise, you need to search out the root cause. Most often the source of the noise is a loose or worn plunger. Check the plunger to make sure it hasn’t broken or that it hasn’t come off completely. If it is the case there is only one solution. Call in a professional plumber to fix the problem. Fixing the plunger is far too important to leave to the homeowner.
The noise may not always be due to plumbing issues. It may be a problem with your air-conditioning unit or maybe your water pressure is low. Sometimes a combination of both occurs. To find out that the cause of the noise is you should call a professional plumber to help you.
If the noise comes from the toilet, you will need to turn the water off and flush the toilet to see if the noise goes away. If it doesn’t you need to try one of the following. If either one of these don’t work you can try one of the other suggestions below.
How do you fix a loud noise when you flush the toilet? When there is not enough water pressure in the system the flushing can be very loud. Sometimes the float is going up and down randomly. If you turn off all the water and wait for the float to settle, you should be able to fix the problem.
The noise is caused by the float valve not closing properly. This valve also controls the water flow through the system. When this happens, it causes the water pressure to go down causing the toilet to clog.